BC vests

4 Item(s)

per page

Grid  List 

Set Descending Direction
  1. "NEW" SEAWOLF WEIGHT HARNESS

    THE "NEW" SEAWOLF™ Weight Harness

    $249.99

    The SEASOFT SEAWOLF™ Weight Harness is designed for divers who need a large amount of weight to attain neutral buoyancy OR who have problems wearing a conventional weight belt.  

    The SEASOFT SEAWOLF™ Weight Harness is completely adjustable on every plane.  It can be lengthened, shortened, and the weight pockets can be moved and positioned forward and backward on the 2" webbing waist belt.  Each pocket is capable of holding up to 30 lbs. of weights.

    Simply pull the YELLOW handles for gravity assisted ditching in any emergency!  

    Learn More
  2. Seasoft Quickpack Vest

    SEASOFT QUIKPAK™ Diving Vest

    $329.99

    The SEASOFT QUIKPAK Diving Vest holds a 13 or 19 cu. ft. cylinder and has a ditchable weight pocket that holds up to 14 lbs. of weight that is located right under the bottom of the tank.  The weights are ditched by pulling on the Yellow Ripcord, located on the right shoulder, down and back toward the butt.  

    The SEASOFT QUIKPAK™ is perfect for shallow water diving, commercial, search and rescue, hookah bail out or boat repair.  Since the QUIKPAK does not have a bouyancy bladder, if the diver is in water deeper than their airway, they should be tethered to the surface.

    One-size-fits-all adjustability ensures the right fit for every diver between 100-280 lb.  Smaller and Larger cummerbunds are available for those that are above or below that range.

    Learn More
  3. "FREE" Diving Vest

    SEASOFT FREE™ Diving Vest

    $329.99

    The NEW redesigned for 2015 SEASOFT FREE™ Diving Vest was developed to liberate you from wearing a weight belt while “free diving".  The FREE holds up to 40 lbs. of weight, fits divers who weigh 100 to 280 lb. and will fit a smaller or larger diver with the optional cummerbunds.

    Be FREE of a weight belt while free diving, get the SEASOFT FREE™ Diving Vest.

    WARNING:  We have recently become aware of an abalone harvesting method known as "rock-picking" in N. California.  This involves a person searching for abalone on a low tide while over-weighted with weights using a wetsuit, mask, and a float tube but no fins.  They search for abalone through the mask and then "scramble" while heavily over-weighted and breath-hold to harvest the abalone.  This is highly dangerous, risky and unsafe.  This person has 1. No air source; 2. No means of propulsion (fins); and 3. No flotation device (BC);

    At low tide you have an uneven bottom that could be over your head, there are kelp forests that could entangle you, and there are rogue waves that can sweep you into water over your head.  It is just not worth it.  A few abalone are not worth dying for!  SEASOFT SCUBA will not knowingly sell any diving products to a "rock-picker".  

    Free diving with fins for abalone can be a fun and challenging sport, why not learn this sport from a local expert instructor?

    Learn More
  4. Inflator Assemblies 14" & 18"

    SEASOFT Buoyancy Compensator Inflator Assemblies

    $69.99

    SEASOFT's INFLATOR ASSEMBLY is rugged, easy to use, tough and inexpensive.  It's simple yet elegant, minimalist design has withstood the test of time and its performance is legendary.   There are many divers that choose this inflator over other "prettier" ones because they know that on that once in a lifetime trip this inflator is less likely to fail.

    The SEASOFT INFLATOR ASSEMBLY will fit most "alternate air sources" with or without an adaptor, check with your local SEASOFT Authorized Dealer for specific brands.  

    The SEASOFT INFLATOR ASSEMBLY will fit SEASOFT's PRO BCs™, SEALION BCs™, & TRAVLITE BCs™.

    We recommend the 18" SEASOFT INFLATOR ASSEMBLY for those large divers who would be more comfortable with a longer inflator assembly.

    There is a two year warranty on SEASOFT's INFLATOR ASSEMBLY for materials and workmanship.

    IMPORTANT:  Unless you have been trained and instructed to do so, we highly recommend that you allow your local SEASOFT Authorized Dealer or other trained person to attach your SEASOFT INFLATOR ASSEMBLY to your BC.

    Learn More

4 Item(s)

per page

Grid  List 

Set Descending Direction