Pockets

8 Item(s)

per page

Grid  List 

Set Ascending Direction
  1. Quickditch Pocket

    SEASOFT QUIK DITCH Weight Pockets™

    $159.99

    If you dive a back-plate and wing AND you need weight pockets, these should be your only choice!

    The SEASOFT QUIK DITCH™ Weight Pockets™ can be mounted on any 2” webbing.  They are secured with 2 “weight keepers” or slides, which are already attached to the pocket.  Weave the webbing thru the slides and sleeve and it is mounted for unsurpassed security and comfort.  

    The SEASOFT QUIK DITCH™ Weight Pockets™ ditch from the bottom by pulling the handle down and weights are put in from the top.  The release mechanism features a sealed spring inside a reinforced casing to prevent any foul up from sand or any other debris. 

    Each pocket will hold up to 15 lbs. of weights and has built-in grommet holes to secure a knife to the pocket without interfering with the ditching mechanism.  If you need pockets for your Back-Plate and Wings, nothing beats the QUIK DITCH Weight Pockets™!

    Learn More
  2. SEASOFT ORANGE MESH WEIGHT POCKETS

    SEASOFT ORANGE MESH Weight Pockets

    $59.99

    These handy mesh pockets fit inside the pockets of the SEASOFT PRO™ and SEALION™ BCs, the SEAWOLF Weight Harness™, and the QUIK DITCH Weight Pockets™.  

    They have sturdy zippers and hold up to 15 lbs. of soft weights. Attached handles allow you to easily take your weight pockets out as required.

    Part #:  201-005  ORANGE MESH POCKETS to fit the above BCs and older SEAWOLF™ Weight Harnesses.  Holds 15 lbs. each.

    Part #:  201-006  ORANGE MESH POCKETS to fit the NEWER SEAWOLF™ Weight Harnesses and QUIK DITCH™ Pockets.  Holds 20 lbs. each.

    Learn More
  3. SEASOFT "ONE" TACTICAL ACCESSORY POCKET

    SEASOFT "ONE" TACTICAL ACCESSORY POCKET

    $69.99

    Once in a while a product comes along and defines what everyone else has been trying to do!

    The SEASOFT  “ONE” Tactical Accessory Pocket™, manufactured in the United States, is that one pocket that slides onto the 2” webbing of your plate and wing, achieving virtually every task that would take 2 or 3 other pockets to accomplish.

    First of all, it is the right size, not too big and clunky like some of those giant pockets.  The  “ONE” TACTICAL ACCESSORY POCKET™ is 8” wide by 9” high and can accept objects up to 6.5” deep.  You could carry a spare mask, a reel, and a length of rope AT THE SAME TIME in the compact space!  It does all this while weighing in at 8 oz.

    Next up it multitasks!  Not only does it have a huge pocket but also a built in GOODY-BAG with a drawstring.  This goody-bag measures a healthy 7” wide by 12” long and is constructed of strong nylon mesh.

    There is a full 2” Stainless extended length D-ring bar-tacked to 2” weight belt webbing, encompassing 80% of the body of the pocket for stability and strength.

    The two nickel–plated grommets will allow you to mount a dive knife, well below the zipper, so that you have one easily available when needed.

    SEASOFT uses only #10 zippers because of their robust size, strength, functionality, and longevity.  There is another nickel-plated grommet at the bottom to allow drainage when exiting the water.

    If you have been searching for that ONE pocket to wear with your gear, this is probably it. It’s the right size, performing at a level others simply can’t match. 

    SEASOFT’s “ONE” Tactical Accessory Pocket, when you want only ONE pocket, but you want it to do so much more.

    Learn More
  4. SEASOFT Trim Pockets  (Pair)

    SEASOFT Trim Pockets (Pair)

    $39.99

    When adding weights to your gear, either on a tank strap, weight belt or weight harness, this is the cleanest, easiest way to go. 

    SEASOFT Trim Pockets hold up to 5 lb. each with drain holes in the bottom and a huge VELCRO flap to keep the weights in place. The back of the SEASOFT Trim Pockets are designed to either be mounted directly onto 2” webbing with a webbed loop or a fold over VELCRO flap that folds over itself for a secure fit. 

    Sold in pairs.

    Learn More
  5. SEASOFT's TACTICAL TRIM POCKETS™

    SEASOFT's TACTICAL TRIM POCKETS™

    $69.99

    Here is a short video featuring SEASOFT's founder Bruce Justinen describing the SEASOFT Tactical Trim Pockets!     https://youtu.be/jI60dhUdRdg

    Why should you buy a pair of SEASOFT TACTICAL TRIM POCKETS?

    Sometimes you only need 5 to 10 lbs. of ditchable weight because of the gear you are wearing.  Each of the SEASOFT TACTICAL TRIM POCKETS™ holds up to 5 lbs. of soft weight and allows a diver to add up to 10 lbs. of ditchable weight to their dive gear.   

    IMPORTANT: Never add more than one pair of ditchable trim pockets to your gear.

    SEASOFT TACTICAL TRIM POCKETS™ mount with overlapping 2" VELCRO™ bands that are held in place by being against the body of the diver.  

    IMPORTANT:  TO DITCH YOUR WEIGHTS - PULL the YELLOW handles straight down! 

    Divers should always ROUTINELY practice ditching their weights:

    1. On dry land.

    2. In shallow water;

    3. By mentally running through the ditching motion before every dive.

    This will acclimate you to be prepared to ditch your weights in any emergency should it arise during a dive.  If ditching your weights is not completely ingrained into your subconscious then you are simply no prepared to dive safely.  

    SEASOFT TACTICAL TRIM POCKETS™  can be turned "upside down" and used as trim pockets and mounted on your tank straps or anywhere. 

    SEASOFT's TACTICAL TRIM POCKETS™ are an easy way to add up to 10 lbs. of ditchable weight to your gear. 

    Part #: 201-008T

    Learn More
  6. SEASOFT's SeaGLU 2oz., 8 oz. Wetsuit Adhesive and SEAGLU 2 oz.Repair Kit

    SEASOFT's SeaGLU 2oz., 8 oz. Wetsuit Adhesive and SEAGLU 2 oz.Repair Kit

    $12.99

    Watch a short video about SEASOFT's SEAGLU™ Wetsuit Adhesive!   https://youtu.be/kmgmC0yCTU8

    There is a detailed video on Youtube.com that describes, in detail, how to use the repair kit to fix a tear in a wetsuit or drysuit.  You can find it at: https://www.youtube.com/watch?v=4Z5I4_wLtlM     You can also find it in the video section of this website.

    Why should you buy SEASOFT's SeaGLU or SeaGLU Repair Kit?

    SEASOFT's SeaGLU™ is the the adhesive used by the world's best manufacturers to make their wetsuits and other neoprene products.  It is simply the best.  We have been using this adhesive here at SEASOFT for more than 20 years and we know you will have the same success we do.  SeaGLU™ is an easy to use and quick to set up adhesive that works with all watersport neoprene.

    From Bruce Justinen, president of SEASOFT SCUBA, "More than 20 years ago I was diving in Canada and tore my neoprene drysuit.  A fellow diver handed me a jar of black neoprene glue and I repaired my suit.  I was amazed at how easy it was to use and how fast it cured.  Now a couple of decades later this Canadian company is recognized as the premier manufacturer of wetsuit and drysuit glues in the world.  Having made continuous upgrades to their glues over that long period of time their glues are used by most of the best wetsuit and drysuit companies.  We now are selling that same wetsuit adhesive: SeaGLU™ is available for YOUR repair."

    SeaGLU™ is a fantastic adhesive that comes packaged in a metal container with an integrated brush built into the handle.  SeaGLU™ has a long shelf life due to the metal container that does not allow the glue solvents to migrate through the walls like they do in plastic containers.  Just keep the lid tightly closed.

    Part #: 003-014  SeaGLU 2 oz. Wetsuit, Seal and Neoprene Adhesive in metal can with integrated brush

                003-015 REPAIR KIT  - SeaGLU™ 2 oz. Wetsuit, Seal and Neoprene Adhesive with a 6" x 6" 3.5 mm high quality neoprene patch.

                003-018 SeaGLU 8 oz. DIVE STORE Size Wetsuit, Seal and Neoprene Adhesive

     

    Learn More
  7. SEASOFT's SEAVUE 2 oz. MASK SCRUB

    SEASOFT's SEAVUE 2 oz. MASK SCRUB

    $4.29

    Here is a short video on SEASOFT's SEAVUE Mask Scrub with Natural Flaxseed Meal!   https://youtu.be/5Ljr8Zq2D4A

    SEASOFT’s SEAVUE 2 fl. oz. Mask Scrub with Natural Flaxseed Meal™ Features:

    • The only mask scrub to be engineered to work with ALL dive masks.  

    • Works with Anti-reflective Coatings.

    • Includes both Calcium Carbonate and Natural Flaxseed Meal for maximum yet gently lens cleaning.

    • Will not scratch glass.

    • No need to push down hard, gently clean with easy pressure in circular motions.

    • Rinses away with warm, clear water.

    • Pleasing “Pina Colada” scent.

    • Easy to use 2 fl oz. size.

    SEASOFT’s SEAVUE Mask Scrub with Natural Flaxseed Meal™ Specifications

    Product:    

    A Mask Scrub engineered to work with ALL dive masks.

    Mask Types:    

    Regular dive lenses, Anti-reflective coated lenses.

    Residues Removed:

    • mold release residues

    • chemical compounds

    • compounds left behind by assembly people

    • the uneven application of metal oxides that comprise Anti-reflective Coatings

    Active Ingredients:    

    Calcium Carbonate and Natural Flaxseed Meal in a mild detergent.

    Application:                

    Gentle application of mask scrub in circular motions

    Scent:                       

    Pleasing “Pina Colada” scent.

    Size:                          

    2 fl. oz. (60 ml)

    Manufacturer’s Part #:

    501-808

    Learn More
  8. SEASOFT's SeaGLU-D™  2 oz. & 8 oz. Drysuit Adhesive

    SEASOFT's SeaGLU-D™ 2 oz. & 8 oz. Drysuit Adhesive

    $16.99

    Watch a short video about SEASOFT's SEAGLU-D™ DRYSUIT Adhesive!  https://youtu.be/3cFfK9hD3iY

    SEASOFT's SeaGLU-D™ is the DRYSUIT adhesive used by the world's best manufacturers.  It has a super strong bond and sets up fast.  Practice with scrap material before starting a major repair.

     We have been using this adhesive here at SEASOFT for more than 20 years and we know you will have the same success we do.  SeaGLU-D™ is relatively easy to use and is a very quick to set up adhesive that works with all types of neoprene and shell suit fabrics.

    SeaGLU-D™ is a fantastic drysuit adhesive that comes packaged in a metal container with an integrated brush built into the handle.  SeaGLU-D™ has a long shelf life due to the metal container that does not allow the glue solvents to migrate through the walls like they do in plastic containers.  BUT you must keep the lid tightly closed, if not it WILL DRY OUT and this is not covered by warranty.

    Part #: 003-119  SeaGLU-D 2 oz. DRYSUIT Adhesive in metal can with integrated brush.

                003-118 SeaGLU-D 8 oz. DIVE STORE Size DRYSUIT Adhesive

     

    Learn More

8 Item(s)

per page

Grid  List 

Set Ascending Direction