SEASOFT M3™ 3 mm Drysuit Hood for wearing with a full face mask

Be the first to review this product

Availability: In stock

$99.99

Quick Overview

The SEASOFT M3™ 3 mm Drysuit Hood is designed to be worn with a full face mask.  It has a skin in seal facing the diver's face AND the mask with a layer of tough nylon fabric sandwiched in between the two.  


The three back panels are compressed neoprene for thermal protection so that your hood is NOT getting thinner as you are getting deeper.


SEASOFT uses 4 different types of neoprene to make these hoods.


The SEASOFT M3™ 3 mm Drysuit Hood is the best.


Why not be WARM?

SEASOFT PRO/C3 Hoods

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • SEASOFT PRO/C3 Hoods
  • Hood size chart

* Required Fields

$99.99

Details

Why should you buy this SEASOFT M3™ 3 mm Drysuit Hood?
 
The SEASOFT M3 3 mm Drysuit Hood is our commercial drysuit hood designed to be worn with a full face mask.  The PRO / M3™ has a layer of skin on the inside and on the outside with a layer of tough nylon in between these two layers.  The skin allows the hood to seal to your face and the full face mask to seal to the hood. 
Of course, the three back panels are of compressed neoprene to provide you with full thermal protection as you descend. You don't want your hood getting thinner as the water is getting colder.
There are no seams down the middle of the chin and this prevents the #1 cause of jaw fatique.
There are two layers of Titanium Flake Foil™ for added heat retention.
At the top of the hood there are two small holes with a built in baffle system to purge excess air from inside your hood while preventing cold water from entering your hood. 
The SEASOFT M3™ 3 mm Drysuit Hood is the perfect commercial hood for that specific dive.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.