Hoods

Items 1 to 10 of 11 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction
  1. Seasoft PRO3™ 3 mm Wetsuit Hood

    SEASOFT PRO3™ 3 mm Wetsuit Hood

    $39.99

    SEASOFT PRO3™ 3 mm Wetsuit Hood, the comfortable hood that doesn't get colder the deeper you go because it uses 5 different types of neoprene including compressed neoprene for the back three panels.

    The SEASOFT PRO3™ 3 mm Wetsuit and Drysuit Hoods are very unique in that some folks actually find them to be as warm as some other companies 5 and 6 MM hoods. Here is why:

    1.  The compressed neoprene doesn't get thinner as you go deeper so your head is not going to get subjected to a hood that is being squeeezed thinner and thinner the deeper you go.

    2.  The 3mm material is going to naturally fit and stretch around your head better.  This leaves less room for cold water to occupy UNDER your hood, this helps to maintain warmth as well.

    3.  The Titanium Flakes Poil Technology™ creates 2 layers of titanium foil that reflects cold away and reflects your heat in keeping you warmer than hoods without this technology.

    The results of all this work - a warmer AND more comfortable hood!

    Learn More
  2. SEASOFT's SeaGLU-D™  2 oz. & 8 oz. Drysuit Adhesive

    SEASOFT's SeaGLU-D™ 2 oz. & 8 oz. Drysuit Adhesive

    $16.99

    Watch a short video about SEASOFT's SEAGLU-D™ DRYSUIT Adhesive!  https://youtu.be/3cFfK9hD3iY

    SEASOFT's SeaGLU-D™ is the DRYSUIT adhesive used by the world's best manufacturers.  It has a super strong bond and sets up fast.  Practice with scrap material before starting a major repair.

     We have been using this adhesive here at SEASOFT for more than 20 years and we know you will have the same success we do.  SeaGLU-D™ is relatively easy to use and is a very quick to set up adhesive that works with all types of neoprene and shell suit fabrics.

    SeaGLU-D™ is a fantastic drysuit adhesive that comes packaged in a metal container with an integrated brush built into the handle.  SeaGLU-D™ has a long shelf life due to the metal container that does not allow the glue solvents to migrate through the walls like they do in plastic containers.  BUT you must keep the lid tightly closed, if not it WILL DRY OUT and this is not covered by warranty.

    Part #: 003-119  SeaGLU-D 2 oz. DRYSUIT Adhesive in metal can with integrated brush.

                003-118 SeaGLU-D 8 oz. DIVE STORE Size DRYSUIT Adhesive

     

    Learn More
  3. Seasoft Ti PRO™ 6 mm Wetsuit Hood

    SEASOFT Ti PRO™ 6 mm Wetsuit Hood

    $49.99

    SEASOFT Ti PRO™ 6 mm Wetsuit Hood, the comfortable hood that doesn't get colder the deeper you go because it uses 5 different types of neoprene including compressed neoprene for the back three panels! Learn More
  4. SEASOFT PINK SEA3 Reversible Beanie

    SEASOFT's PINK SEA3™ Reversible Beanie "HELP FIGHT BREAST CANCER"

    $29.99

    You don’t need a full hood but you need just a bit of warmth or protection and you’re looking for a good beanie.  Consider the SEASOFT PINK SEA3™ Reversible Beanie, a 3 mm high quality built beanie with a one piece, non-irritating chin strap.  Built to last with SEASOFT's usual attention to detail.  2 Year Warranty! Super comfortable, the SEASOFT PINK SEA3™ Reversible Beanie is PINK on one side and BLACK on the other with graphics on both sides.  Sizes Xsmall to XLarge!  

    The SEA3™ is warmer because of the 3 mm thickness yet it doesn't feel too hot to anyone, but because of the 3 mm thickness it will last longer than all the rest!

    $2 of every Beanie sold is donated to BREAST CANCER RESEARCH!

    Learn More
  5. SEASOFT SEA 3™ Beanie

    SEASOFT SEA3™ Beanie

    $29.99

    You don’t need a full hood but you need just a bit of warmth or protection and you’re looking for a good beanie.  Consider the SEASOFT SEA3™ Beanie, a 3 mm high quality built beanie with a one piece, non-irritating chin strap.  Built to last with SEASOFT's usual attention to detail.  2 Year Warranty! Super comfortable, the SEASOFT SEA3™ Beanie has a black exterior, with crimson on the inside.  Sizes Xsmall to 2XLarge!  

    The SEA3™ is warmer because of the 3 mm thickness yet it doesn't feel too hot to anyone, but because of the 3 mm thickness it will last longer than all the rest!

    Learn More
  6. SEASOFT Ti PRO™ Drysuit Hood w/ zip

    SEASOFT Ti PRO™ 6 mm Drysuit Hood with Zipper

    $59.99

    The SEASOFT Ti PRO™ 6 mm Drysuit Hood with Zipper is the most comfortable and warmest drysuit hood available,  Here's why:

    • The 3 back panels are compressed neoprene, your hood should not be getting thinner as you go deeper!

    • Rugged #10 size zipper for those that desire this feature.

    • There are no seams in the middle of the seam to cause jaw fatique.

    • SEASOFT uses 4 different types of neoprene to make this hood, others use one or two.

    • There are two tiny holes in the top of the hood with a baffle system to allow air to purge.

    • There is "skin in" on the neck to bind to your drysuit seal.

    • High quality neoprene is used throughout on every hood.

    Learn More
  7. Seasoft Drysuit Hood

    SEASOFT Ti PRO™ 3 mm Drysuit Hood / no zip

    $39.99

    The SEASOFT Ti PRO™ 3 mm Drysuit Hood with no zipper is the most comfortable and warmest drysuit hood available,  Here's why:

    • The 3 back panels are compressed neoprene, your hood should not be getting thinner as you go deeper!

    • There are no seams in the middle of the seam to cause jaw fatique.

    • SEASOFT uses 4 different types of neoprene to make this hood, others use one or two.

    • There are two tiny holes in the top of the hood with a baffle system to allow air to purge.

    • There is "skin in" on the neck to bind to your drysuit seal.

    • High quality neoprene is used throughout on every hood.

    Learn More
  8. Seasoft Drysuit Hood

    SEASOFT Ti PRO™ 6 mm Drysuit Hood / no zip

    $49.99

    The SEASOFT Ti PRO™ 6 mm Drysuit Hood with no zipper is the most comfortable and warmest drysuit hood available,  Here's why:

    • The 3 back panels are compressed neoprene, your hood should not be getting thinner as you go deeper!

    • There are no seams in the middle of the seam to cause jaw fatique.

    • SEASOFT uses 4 different types of neoprene to make this hood, others use one or two.

    • There are two tiny holes in the top of the hood with a baffle system to allow air to purge.

    • There is "skin in" on the neck to bind to your drysuit seal.

    • High quality neoprene is used throughout on every hood.

    Learn More
  9. SEASOFT PRO/C3 Hoods

    SEASOFT PRO / M3™ 3 mm Drysuit Hood for wearing with a full face mask

    $69.99

    The SEASOFT PRO / M3™ 3 mm Drysuit Hood is designed to be worn with a full face mask.  It has a skin in seal facing the diver's face AND the mask with a layer of tough nylon fabric sandwiched in between the two.  

    The three back panels are compressed neoprene for thermal protection so that your hood is NOT getting thinner as you are getting deeper.

    SEASOFT uses 4 different types of neoprene to make these hoods.

    The SEASOFT PRO / M3™ 3 mm Drysuit Hood is the best.

    Learn More
  10. SEASOFT PRO / C6 Hoods

    SEASOFT PRO / M6™ 6 mm Drysuit Hood for wearing with a full face mask

    $79.99

    The SEASOFT PRO / M6™ 6 mm Drysuit Hood is designed to be worn with a full face mask.  It has a skin-in seal facing the diver's face AND a skin seal facing out toward the mask with a layer of tough nylon fabric sandwiched in between the two.  

    The three back panels are compressed neoprene for thermal protection so that your hood is NOT getting thinner as you are getting deeper.

    SEASOFT uses 4 different types of neoprene to make these hoods.

    The SEASOFT PRO / M6™ 6 mm Drysuit Hood is the best commercial diving hood available anywhere.

    Now available in 2XL to Xtra Small!

    Learn More

Items 1 to 10 of 11 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction