Hoods

Items 1 to 10 of 13 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction
  1. SEASOFT NANOOK 6™ & NANOOK 9™ Hand-crafted Coldwater Drysuit Hoods

    SEASOFT NANOOK 6™ & NANOOK 9™ Hand-crafted Coldwater Drysuit Hoods

    $119.99

    The NANOOK Hoods are made with:

    1. PRE-Stretched neoprene, this is a first, this pre-stretching gives your hood that "lived in" feeling. It can naturally form to you, not fight you, FRIEND VS. FOE! The difference is immediate and a revelation! It feels like you have been diving it for years.

    2. Abrasion-resistant DINA-HIDE™ that covers a 6 mm or 8 mm high quality compressed neoprene with a .5 mm layer of heat reflecting Titanium Foil™ on the inside.  You would truly have to try to wear out the NOOTKA's.

    3. Each seam is glued with 3 layers of premium wetsuit glue and then another 3 layers of premium wetsuit glue are laid down on top of those and then a 1” wide straight cut 1.5 mm 3 ply strip of nylon/neoprene/nylon is has 3 layers of premium wetsuit glue applied to it and it is glued to those 3 layers for a fortress like barrier. But, there’s more! We turn the hood inside out and blind stitch and bar tack the all of the seams to anchor them for a final throwdown to the cold.  WHAT!

    4. Two small aero holes are burned into the peak of your hood and then covered with a heat applied gusset. These aero holes allow air to leave your hood but do not allow it to leak in. The size of these aero holes have been carefully researched to work as designed.

    “If you are going to dive cold, you might as well dive warm!”

    The NANOOK 6 and NANOOK 9 advanced Cold Water Drysuit Hoods are the world’s best hoods for extreme diving in the harshest and coldest conditions.

    Learn More
  2. SEASOFT SEA 3™ Beanie

    SEASOFT SEA3™ Beanie

    $29.99

    You don’t need a full hood but you need just a bit of warmth or protection and you’re looking for a good beanie.  Consider the SEASOFT SEA3™ Beanie, a 3 mm high quality built beanie with a one piece, non-irritating chin strap.  Built to last with SEASOFT's usual attention to detail.  2 Year Warranty! Super comfortable, the SEASOFT SEA3™ Beanie has a black exterior, with crimson on the inside.  Sizes Xsmall to 2XLarge!  

    The SEA3™ is warmer because of the 3 mm thickness yet it doesn't feel too hot to anyone, but because of the 3 mm thickness it will last longer than all the rest!

    Learn More
  3. SEASOFT PRO / C6 Hoods

    SEASOFT PRO / M6™ 6 mm Drysuit Hood for wearing with a full face mask

    $119.99

    The SEASOFT PRO / M6™ 6 mm Drysuit Hood is designed to be worn with a full face mask.  It has a skin-in seal facing the diver's face AND a skin seal facing out toward the mask with a layer of tough nylon fabric sandwiched in between the two.  

    The three back panels are compressed neoprene for thermal protection so that your hood is NOT getting thinner as you are getting deeper.

    SEASOFT uses 4 different types of neoprene to make these hoods.

    The SEASOFT PRO / M6™ 6 mm Drysuit Hood is the best commercial diving hood available anywhere.

    Now available in 2XL to Xtra Small!

    Why not be WARM?

    Learn More
  4. SEASOFT Ti PRO™ Drysuit Hood w/ zip

    SEASOFT Ti PRO™ 6 mm Drysuit Hood with Zipper

    $89.99

    The SEASOFT Ti PRO™ 6 mm Drysuit Hood with Zipper is the most comfortable and warmest drysuit hood available,  Here's why:

    • The 3 back panels are compressed neoprene, your hood should not be getting thinner as you go deeper!

    • Rugged #10 size zipper for those that desire this feature.

    • There are no seams in the middle of the seam to cause jaw fatique.

    • SEASOFT uses 4 different types of neoprene to make this hood, others use one or two.

    • There are two tiny holes in the top of the hood with a baffle system to allow air to purge.

    • There is "skin in" on the neck to bind to your drysuit seal.

    • High quality neoprene is used throughout on every hood.

    Why not be WARM?

    Learn More
  5. Seasoft Drysuit Hood

    SEASOFT Ti PRO™ 6 mm Drysuit Hood / no zip

    $69.99

    The SEASOFT Ti PRO™ 6 mm Drysuit Hood with no zipper is the most comfortable and warmest drysuit hood available,  Here's why:

    • The 3 back panels are compressed neoprene, your hood should not be getting thinner as you go deeper!

    • There are no seams in the middle of the seam to cause jaw fatique.

    • SEASOFT uses 4 different types of neoprene to make this hood, others use one or two.

    • There are two tiny holes in the top of the hood with a baffle system to allow air to purge.

    • There is "skin in" on the neck to bind to your drysuit seal.

    • High quality neoprene is used throughout on every hood.

    Why not be WARM?

    Learn More
  6. Seasoft Ti PRO™ 6 mm Wetsuit Hood

    SEASOFT Ti PRO™ 6 mm Wetsuit Hood

    $69.99

    SEASOFT Ti PRO™ 6 mm Wetsuit Hood, the comfortable hood that doesn't get colder the deeper you go because

    it uses 5 different types of neoprene including compressed neoprene for the back three panels!

    Why not be WARM?

    Learn More
  7. Seasoft Drysuit Hood

    SEASOFT SEA3™ 3 mm Drysuit Hood / no zip

    $59.99

    The SEASOFT SEA3™ 3 mm Drysuit Hood with no zipper is the most comfortable and warmest drysuit hood available,  Here's why:

    • The 3 back panels are compressed neoprene, your hood should not be getting thinner as you go deeper!

    • There are no seams in the middle of the seam to cause jaw fatique.

    • SEASOFT uses 4 different types of neoprene to make this hood, others use one or two.

    • There are two tiny holes in the top of the hood with a baffle system to allow air to purge.

    • There is "skin in" on the neck to bind to your drysuit seal.

    • High quality neoprene is used throughout on every hood.

    The SEASOFT SEA3 3 mm Drysuit Hood!  Why not be WARM?

    Learn More
  8. SEASOFT PRO/C3 Hoods

    SEASOFT M3™ 3 mm Drysuit Hood for wearing with a full face mask

    $99.99

    The SEASOFT M3™ 3 mm Drysuit Hood is designed to be worn with a full face mask.  It has a skin in seal facing the diver's face AND the mask with a layer of tough nylon fabric sandwiched in between the two.  

    The three back panels are compressed neoprene for thermal protection so that your hood is NOT getting thinner as you are getting deeper.

    SEASOFT uses 4 different types of neoprene to make these hoods.

    The SEASOFT M3™ 3 mm Drysuit Hood is the best.

    Why not be WARM?

    Learn More
  9. Seasoft SEA3™ 3 mm Wetsuit Hood

    SEASOFT SEA3™ 3 mm Wetsuit Hood

    $59.99

    The BOTTOM LINE -  if you were an expert and could build your own hood, you would build the SEASOFT SEA3™ 3 mm Wetsuit Hood for yourself!   Why not be WARM? Why not be WARM?  Why not be WARM? Why not be WARM?

     

    Learn More
  10. SEASOFT PINK SEA3 Reversible Beanie

    SEASOFT's PINK SEA3™ Reversible Beanie "HELP FIGHT BREAST CANCER"

    $29.99

    You don’t need a full hood but you need just a bit of warmth or protection and you’re looking for a good beanie.  Consider the SEASOFT PINK SEA3™ Reversible Beanie, a 3 mm high quality built beanie with a one piece, non-irritating chin strap.  Built to last with SEASOFT's usual attention to detail.  2 Year Warranty! Super comfortable, the SEASOFT PINK SEA3™ Reversible Beanie is PINK on one side and BLACK on the other with graphics on both sides.  Sizes Xsmall to XLarge!  

    The SEA3™ is warmer because of the 3 mm thickness yet it doesn't feel too hot to anyone, but because of the 3 mm thickness it will last longer than all the rest!

    $2 of every Beanie sold is donated to BREAST CANCER RESEARCH!

    Learn More

Items 1 to 10 of 13 total

per page
Page:
  1. 1
  2. 2

Grid  List 

Set Descending Direction