SEASOFT's SeaGLU-D™ 2 oz. & 8 oz. Drysuit Adhesive

Be the first to review this product

Availability: In stock

$16.99

Quick Overview

Watch a short video about SEASOFT's SEAGLU-D™ DRYSUIT Adhesive!  https://youtu.be/3cFfK9hD3iY


SEASOFT's SeaGLU-D™ is the DRYSUIT adhesive used by the world's best manufacturers.  It has a super strong bond and sets up fast.  Practice with scrap material before starting a major repair.


 We have been using this adhesive here at SEASOFT for more than 20 years and we know you will have the same success we do.  SeaGLU-D™ is relatively easy to use and is a very quick to set up adhesive that works with all types of neoprene and shell suit fabrics.


SeaGLU-D™ is a fantastic drysuit adhesive that comes packaged in a metal container with an integrated brush built into the handle.  SeaGLU-D™ has a long shelf life due to the metal container that does not allow the glue solvents to migrate through the walls like they do in plastic containers.  BUT you must keep the lid tightly closed, if not it WILL DRY OUT and this is not covered by warranty.


Part #: 003-119  SeaGLU-D 2 oz. DRYSUIT Adhesive in metal can with integrated brush.


            003-118 SeaGLU-D 8 oz. DIVE STORE Size DRYSUIT Adhesive


 




SEASOFT's SeaGLU-D™  2 oz. & 8 oz. Drysuit Adhesive

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

$16.99
  • Details

    SEASOFT'S SEAGLU-D™ is our drysuit glue we use to manufacture our neoprene drysuits.  It is not a cheap knockoff of some watered down wetsuit glue.

    Customers naturally ask us how it is different than our SEAGLU Wetsuit Adhesive™.  

    SEAGLU-D Drysuit Adhesive:

    1.  Has a stronger bond.

    2.  Has a little bit less elasticity, maybe 15 to 20% less.

    3.  It sets up faster so you have less time to mess around but when it sets, it sets. You typically have 15 to 30 seconds.

    4.  If you are repairing a drysuit and this includes most bag or trilaminate suits it really works with a long-lasting strong bond.

    5.  Works well with latex seals but you only get one shot.  Also, too much glue can damage the latex because of the strong solvents in SEAGLU-D but it works quick and seals extremely well.

    Here is a short video about SEAGLU-D featuring Bruce Justinen, President of SEASOFT SCUBA

    https://youtu.be/3cFfK9hD3iY

    You can also find it in the video section of this website.

    HINTS FOR USING SEASOFT'S SEAGLU™.

    1. The fumes from SOLVENTS in SEAGLU-D™ or in the solvents needed to clean up are extremely toxic and can make you sick and can even cause your death.  You MUST use a recommended ventilation mask for protection or work in an extremely well-ventilated area.

    2.  Clean up with "Laquer Thinner" or Toulene.  

    3.  All glues are flammable, be extremely careful around flames and do not smoke while using SeaGLU-D™, have a large fire extinguisher ready if needed.

    4.  SeaGLU-D™ dries in minutes so it is wiser and more efficient to do small areas at a time.

    5.  If you are not sure how to do a repair then you will have much better results referring your repair to professionals.

    6.  When a repair starts going "sideways" on you the best thing to do is to STOP!  Let the glue dry.  Pack everything up.  See the local professionals with experience.

    7.  Watch the tutorial:  https://www.youtube.com/watch?v=4Z5I4_wLtlM  

    8.  If the lid is not sealed TIGHTLY your SeaGLU-D™ will dry out and is not covered by any warranty!

     

    Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.