Flashlights

The SEASOFT QUIKPAK Diving Vest holds a 13 or 19 cu. ft. cylinder and has a ditchable weight pocket that holds up to 14 lbs. of weight that is located right under the bottom of the tank.  The weights are ditched by pulling on the Yellow Ripcord, located on the right shoulder, down and back toward the butt.  

The SEASOFT QUIKPAK™ is perfect for shallow water diving, commercial, search and rescue, hookah bail out or boat repair.  Since the QUIKPAK does not have a bouyancy bladder, if the diver is in water deeper than their airway, they should be tethered to the surface.

One-size-fits-all adjustability ensures the right fit for every diver between 100-280 lb.  Smaller and Larger cummerbunds are available for those that are above or below that range.

The SEASOFT RAYGUN-R™ Rechargeable Flashlight is the rechargeable version of the RAYGUN with 300 Lumens, a free lanyard,  a polycarbonate case, and 2 special rechargeable batteries and a wall charger.

The two batteries are twice the size (the two batteries are joined together to make one) and slightly higher in voltage than the regular lithium ion batteries used in the non-rechargeable RAYGUNS.   Because of this voltage difference, the LED circuitry is different so you cannot use these batteries in the regular RAYGUN flashlights.   

And because you get TWO batteries you can use one battery in your RAYGUN-R™ while you charge the other.  NEVER pay for batteries OR run out of burn time. 

There is also an optional car charger available, the car charger shown in the photo is not included in the reguar price.

Available in Black or Yellow!

Watch a short video about SEASOFT's SEAGLU™ Wetsuit Adhesive!   https://youtu.be/kmgmC0yCTU8

There is a detailed video on Youtube.com that describes, in detail, how to use the repair kit to fix a tear in a wetsuit or drysuit.  You can find it at: https://www.youtube.com/watch?v=4Z5I4_wLtlM     You can also find it in the video section of this website.

Why should you buy SEASOFT's SeaGLU or SeaGLU Repair Kit?

SEASOFT's SeaGLU™ is the the adhesive used by the world's best manufacturers to make their wetsuits and other neoprene products.  It is simply the best.  We have been using this adhesive here at SEASOFT for more than 20 years and we know you will have the same success we do.  SeaGLU™ is an easy to use and quick to set up adhesive that works with all watersport neoprene.

From Bruce Justinen, president of SEASOFT SCUBA, "More than 20 years ago I was diving in Canada and tore my neoprene drysuit.  A fellow diver handed me a jar of black neoprene glue and I repaired my suit.  I was amazed at how easy it was to use and how fast it cured.  Now a couple of decades later this Canadian company is recognized as the premier manufacturer of wetsuit and drysuit glues in the world.  Having made continuous upgrades to their glues over that long period of time their glues are used by most of the best wetsuit and drysuit companies.  We now are selling that same wetsuit adhesive: SeaGLU™ is available for YOUR repair."

SeaGLU™ is a fantastic adhesive that comes packaged in a metal container with an integrated brush built into the handle.  SeaGLU™ has a long shelf life due to the metal container that does not allow the glue solvents to migrate through the walls like they do in plastic containers.  Just keep the lid tightly closed.

Part #: 003-014  SeaGLU 2 oz. Wetsuit, Seal and Neoprene Adhesive in metal can with integrated brush

            003-015 REPAIR KIT  - SeaGLU™ 2 oz. Wetsuit, Seal and Neoprene Adhesive with a 6" x 6" 3.5 mm high quality neoprene patch.

            003-018 SeaGLU 8 oz. DIVE STORE Size Wetsuit, Seal and Neoprene Adhesive

Here is a short video on SEASOFT's SEAVUE Mask Scrub with Natural Flaxseed Meal!   https://youtu.be/5Ljr8Zq2D4A

SEASOFT’s SEAVUE 2 fl. oz. Mask Scrub with Natural Flaxseed Meal™ Features:

• The only mask scrub to be engineered to work with ALL dive masks.  

• Works with Anti-reflective Coatings.

• Includes both Calcium Carbonate and Natural Flaxseed Meal for maximum yet gently lens cleaning.

• Will not scratch glass.

• No need to push down hard, gently clean with easy pressure in circular motions.

• Rinses away with warm, clear water.

• Pleasing “Pina Colada” scent.

• Easy to use 2 fl oz. size.

SEASOFT’s SEAVUE Mask Scrub with Natural Flaxseed Meal™ Specifications

Product:    

A Mask Scrub engineered to work with ALL dive masks.

Mask Types:    

Regular dive lenses, Anti-reflective coated lenses.

Residues Removed:

• mold release residues

• chemical compounds

• compounds left behind by assembly people

• the uneven application of metal oxides that comprise Anti-reflective Coatings

Active Ingredients:    

Calcium Carbonate and Natural Flaxseed Meal in a mild detergent.

Application:                

Gentle application of mask scrub in circular motions

Scent:                       

Pleasing “Pina Colada” scent.

Size:                          

2 fl. oz. (60 ml)

Manufacturer’s Part #:

501-808

Watch a short video about SEASOFT's SEAGLU-D™ DRYSUIT Adhesive!  https://youtu.be/3cFfK9hD3iY

SEASOFT's SeaGLU-D™ is the DRYSUIT adhesive used by the world's best manufacturers.  It has a super strong bond and sets up fast.  Practice with scrap material before starting a major repair.

 We have been using this adhesive here at SEASOFT for more than 20 years and we know you will have the same success we do.  SeaGLU-D™ is relatively easy to use and is a very quick to set up adhesive that works with all types of neoprene and shell suit fabrics.

SeaGLU-D™ is a fantastic drysuit adhesive that comes packaged in a metal container with an integrated brush built into the handle.  SeaGLU-D™ has a long shelf life due to the metal container that does not allow the glue solvents to migrate through the walls like they do in plastic containers.  BUT you must keep the lid tightly closed, if not it WILL DRY OUT and this is not covered by warranty.

Part #: 003-119  SeaGLU-D 2 oz. DRYSUIT Adhesive in metal can with integrated brush.

            003-118 SeaGLU-D 8 oz. DIVE STORE Size DRYSUIT Adhesive

The SEASOFT RAYGUN-W™ Wide Beam Flashlight has a special lens that disperses the 300 lumens of light in a wide beam instead of the focused HIGH BEAM of the regular RAYGUN. This is a perfect light for those who like to see a wide field of vision on a night dive or who are looking for an inexpensive video light.

Why buy a SEASOFT FLASHLIGHT POCKET™?

Once you own a SEASOFT Flashlight Pocket™ and find how:

1.effortless it is to use your flashlight.

2. easy it is to put it away.

3. you'll never have to worry about losing your light. 

4. you'll easily be able to disconnect your light and hand it to a friend if needed.

4. you will truly never dive without a SEASOFT Fashlight Pocket again.

FEATURES

1.  Tough CORDURA case with hard polycarbon plastic backing on all sides.

2.  Custom manufactured Stainless Steel Retractor with High Tension Retractor Strength.

3.  Side release buckle where Flashlight and Retractor Line meet for easy disconnect if needed.

4.  Two different methods of attaching to webbing - 1. Webbing thru loop or 2. Double fold over VELCRO™

5.  Once you have a SEASOFT FLASHLIGHT POCKET™ you will never dive without one again!

Always have a flashlight within easy reach with a SEASOFT Flashlight Pocket.  Included is our CUSTOM manufactured stainless steel retractor with HIGH TENSION RETRACTOR STRENGTH.  It will always hold your light.  Hold the SEASOFT Flashlight Pocket upside down, your flashlight will NOT come out until you want it to.  

Two models are now available:

1. Part #: 140-012 .75” to 1.5” fits the smaller aluminum flashlights of any length up to 12".

2. Part #: 140-014 1.5” to 3” fits the SEASOFT RAYGUN Flashlight & lights like the UK SL3 & 4 & SL6.

The SEASOFT RAYGUN-S™ Strobe Light is an expedition strength strobe light incorporating the bulletproof, polycarbonate case of the SEASOFT RAYGUN™ with a high intensity strobe light.