Search results for 'wet suit'

The SEASOFT Drysuits are the ones that beat the expensive suits:  http://ads.bonniercorp.com/scuba/PDF/ScoringChart.pdf

More information below!

SEASOFT TX3 TOP CHOICE by SCUBA LAB - BEST BUY (SEASOFT TX (1.5 mm added for more warmth))

SEASOFT XV-4 TOP CHOICE by SCUBA LAB - TESTER's CHOICE

IMPORTANT: It is rare for us to recommend a woman's cut. Unless the bust and hips of the woman buying the women's cut drysuit match the bust and hips built into the drysuit her NEW drysuit could be very uncomfortable.  With today's fabrics, and the stretch found in the neoprene that SEASOFT uses, we have found that MOST women are more comfortable in a Men's Drysuit Pattern because the hips and chest allow for freedom of movement in these areas.

It should also be noted that a higher percentage of women would be more comfortable in a custom suit.  Contact us to order a Custom Drysuit!

FAQ BELOW

SEASOFT Ti PRO™ 6 mm Wetsuit Hood, the comfortable hood that doesn't get colder the deeper you go because

it uses 5 different types of neoprene including compressed neoprene for the back three panels!

Why not be WARM?

Watch a short video about SEASOFT's SEAGLU-D™ DRYSUIT Adhesive!  https://youtu.be/3cFfK9hD3iY

SEASOFT's SeaGLU-D™ is the DRYSUIT adhesive used by the world's best manufacturers.  It has a super strong bond and sets up fast.  Practice with scrap material before starting a major repair.

 We have been using this adhesive here at SEASOFT for more than 20 years and we know you will have the same success we do.  SeaGLU-D™ is relatively easy to use and is a very quick to set up adhesive that works with all types of neoprene and shell suit fabrics.

SeaGLU-D™ is a fantastic drysuit adhesive that comes packaged in a metal container with an integrated brush built into the handle.  SeaGLU-D™ has a long shelf life due to the metal container that does not allow the glue solvents to migrate through the walls like they do in plastic containers.  BUT you must keep the lid tightly closed, if not it WILL DRY OUT and this is not covered by warranty.

Part #: 003-119  SeaGLU-D 2 oz. DRYSUIT Adhesive in metal can with integrated brush.

            003-118 SeaGLU-D 8 oz. DIVE STORE Size DRYSUIT Adhesive

A short video on SEASOFT'S ABSI-LUBE™ Pure Silicone Spray with Conditioners!        https://youtu.be/7mxEhMu9s94

Why should you buy SEASOFT's ABSI-LUBE™ Pure Silicone Spray with Conditioners?

• Many manufacturers of silicone spray dilute their spray with water to make more money.  Instead of displacing water which is what silicone spray is designed to do it can actually cause rust on metal parts.  The water can also slow absorpsion of the silicone oil by the plastic, rubber and other compounds that would benefit from silicone oil

 • You cannot buy a more advanced silicone spray.

• Contains conditioners that maximize the absorption of silicone oil by O-rings and other vital parts.

•  A very efficient lubricant that will not damage moving parts especially in water.

•  A natural corrosion resistor and protector with UV protection from the sun's damaging rays.

• Dive and outdoor gear last longer because the conditioners protect rubber and synthetic parts.

We know that SEASOFT's ABSI-LUBE™ Silicone Spray costs a bit more than others but we promise you that you get so much more and when you buy a silicone spray don't you really wany one that works.  ABSI-LUBE™ does!

Part #: 003-002  8 fl oz.  ABSI-LUBE™ Pure Silicone Spray in an Aluminum Can with a non-fluorcarbon pump spray

Watch a short video about SEASOFT's SEAGLU™ Wetsuit Adhesive!   https://youtu.be/kmgmC0yCTU8

There is a detailed video on Youtube.com that describes, in detail, how to use the repair kit to fix a tear in a wetsuit or drysuit.  You can find it at: https://www.youtube.com/watch?v=4Z5I4_wLtlM     You can also find it in the video section of this website.

Why should you buy SEASOFT's SeaGLU or SeaGLU Repair Kit?

SEASOFT's SeaGLU™ is the the adhesive used by the world's best manufacturers to make their wetsuits and other neoprene products.  It is simply the best.  We have been using this adhesive here at SEASOFT for more than 20 years and we know you will have the same success we do.  SeaGLU™ is an easy to use and quick to set up adhesive that works with all watersport neoprene.

From Bruce Justinen, president of SEASOFT SCUBA, "More than 20 years ago I was diving in Canada and tore my neoprene drysuit.  A fellow diver handed me a jar of black neoprene glue and I repaired my suit.  I was amazed at how easy it was to use and how fast it cured.  Now a couple of decades later this Canadian company is recognized as the premier manufacturer of wetsuit and drysuit glues in the world.  Having made continuous upgrades to their glues over that long period of time their glues are used by most of the best wetsuit and drysuit companies.  We now are selling that same wetsuit adhesive: SeaGLU™ is available for YOUR repair."

SeaGLU™ is a fantastic adhesive that comes packaged in a metal container with an integrated brush built into the handle.  SeaGLU™ has a long shelf life due to the metal container that does not allow the glue solvents to migrate through the walls like they do in plastic containers.  Just keep the lid tightly closed.

Part #: 003-014  SeaGLU 2 oz. Wetsuit, Seal and Neoprene Adhesive in metal can with integrated brush

            003-015 REPAIR KIT  - SeaGLU™ 2 oz. Wetsuit, Seal and Neoprene Adhesive with a 6" x 6" 3.5 mm high quality neoprene patch.

            003-018 SeaGLU 8 oz. DIVE STORE Size Wetsuit, Seal and Neoprene Adhesive

Why should you buy SEASOFT's LEMON GrenAIDE™ 8 oz. Enzymatic SPRAY?                         Most divers are familiar with SEASOFT's LEMON GrenAIDE™ enzymatic cleaner but not with SEASOFT's LEMON GrenAIDE™ SPRAY.   As you know LEMON GrenAIDE™ is famous for containing special enzymes that attack the SOURCES of that nastiest of odors; but it also contains special shampoos that cleanses your gear AND of course, leaves the wonderful smell of fresh lemons behind.    LEMON GrenAIDE SPRAY™ leaves out the shampoo but includes an extra dose of our special enzymes.  

So you can start the dive with your suit smelling like a beast and end it in a grove of lemons! Protects your gear from bacteria damage too.

Here is a video by the designer of the Ti STEALTH™, Bruce Justinen, President of SEASOFT SCUBA. https://youtu.be/NEnsyw9Bc9U

SEASOFT's Ti STEALTH™ 6 mm Booties, the best athletic dive footwear money can buy.  Here is a quote from many of the on-line boot comparisons for SEASOFT's athletic dive footwear.  The ON-LINE comparison is quoted below:

"This boot (the SEASOFT Ti STEALTH) does everything right."  

"The SEASOFT STEALTH™ is one of the more rugged boots in a group of rugged contenders. This boot does everything right. Climb into a pair of STEALTHs and you can confidently carry your gear up and down stairs or over rocks. The arch support provides stability and supports the foot and ankle. An elevated heel contributes to comfort and eases foot strain on those long hikes to the water’s edge under a heavy load.

The beefy outsole virtually eliminates flex and compression, and when fitted inside a fin it minimizes the up and down motion of the foot while kicking. According to SEASOFT, this design was also intended to eliminate foot cramping while diving. So confident is the company that they actually offer a money-back guarantee—if you get cramps, they will either send you another pair to try, or you can return the boots for a refund.

 This is an email we received from a US Air Force Fighter Pilot:

 SEASOFT's DRYSUIT ACCESSORIES  

• Suspenders

• Inflator hoses

• Pockets

• Pee Valves

• Relief Zippers

• Color Options

• KEVLAR Butt Pads

• CUSTOM Suit Charge

• OVERSIZE Suit Charge

The SEASOFT Ti 5000™ is our coldwater “TECH” drysuit, often chosen by those that do 4 season diving, including ice diving.

• Employs an amazing 5 mm compressed neoprene with a DINA-HIDE™ super-abrasion-resistant exterior with two layers of Titanium Flake Foil™ for warmth.

• SEASOFT STEALTH™ Booties with elevated heel and arch supports for unsurpassed stability, warmth and kicking.

• Front and back - one piece of neoprene, no cross seam in the crotch, eliminating the place where most suits leak.

• Si-Tech valves, the best.

• Forearm mounted exhaust valve vents 5 TIMES faster than a shoulder dump valve giving you better, easier buoyancy control.

• Raglan sleeves for more freedom of movement AND allows air to move freely to the exhaust valve.

• STRETCHTEX Seals™ are warmer, more reliable, and more comfortable.  The neck and wrist seals roll under - the air inside the roll trying to "escape" creates a waterproof seal.

• Knee pads that are practically forever, in 11 years we still have not replaced one.

• Without/with the optional ALASKA Undergarment™ you can dive from 65º to 32º F.

More information below!

IMPORTANT: It is rare for us to recommend a woman's cut. Unless the bust and hips of the woman buying the women's cut drysuit match the bust and hips built into the drysuit her NEW drysuit could be very uncomfortable.  With today's fabrics, and the stretch found in the neoprene that SEASOFT uses, we have found that MOST women are more comfortable in a Men's Drysuit Pattern because the hips and chest allow for freedom of movement in these areas.

It should also be noted that a higher percentage of women would be more comfortable in a custom suit.  Contact us to order a Custom Suit.